Nextelco:CNOC connect
How to connect and interact with the CNOC
The CNOC available in Norway is a two slot chassis based one rack device composed by two cards.
The first card, the one that is above, is a fast ethernet SCC. The second card, which it is below, is a computer which runs the CNOC software.
As frustrating as it is but, it seems impossible to interact with the fast ethernet card. Console port, telnet, ssh... none of the methods is working. However, it provides an IP address to those which require one.
The second card, the computer, is accessible both directly by keyboard and screen as well as remotely through console and ethernet ports. Even if accepts several interaction methods, only through ethernet port based ssh protocol it is possible to set up it. Console port and directly connected screen provide information during the start up and power off. This is the information that provides during these two processes:
AMIBIOS(C)2006 American Megatrends, Inc. Date 09: BIOS/14/09 13:36:46 Ver: 08.00.14 CPU : Intel(R) Celeron(R) M CPU 440 @ 1.86GHz Speed : 1.86 GHz Press DEL to run Setup (F4 on Remote Keyboard) Press F12 if you want to boot from the network Press F11 for BBS POPUP (F3 on Remote Keyboard) The MCH is operating with DDR2-533/CL4 in Single-Channel Mode Initializing USB Controllers .. Done. 1016MB OK USB Device(s): 1 Keyboard Auto-Detecting Pri Master..IDE Hard Disk 0075 Pri Master : SQF-P10S2-2G Ver2.M0J Ultra DMA Mode-2, S.M.A.R.T. Capable and Status OK LILO Loading RDS-32 GE Linux version 2.4.32 (root@RDSHost) (gcc version 2.96 20000731 (Red Hat Linux 7.1 2.96-81)) #2 SMP Thu Oct 29 22:15:14 IST 2009 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009e000 (usable) BIOS-e820: 000000000009e000 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000003f7c0000 (usable) BIOS-e820: 000000003f7c0000 - 000000003f7ce000 (ACPI data) BIOS-e820: 000000003f7ce000 - 000000003f7f0000 (ACPI NVS) BIOS-e820: 000000003f7f0000 - 000000003f800000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved) Warning only 896MB will be used. Use a HIGHMEM enabled kernel. 896MB LOWMEM available. found SMP MP-table at 000ff780 hm, page 000ff000 reserved twice. hm, page 00100000 reserved twice. hm, page 000fc000 reserved twice. hm, page 000fd000 reserved twice. On node 0 totalpages: 229376 zone(0): 4096 pages. zone(1): 225280 pages. zone(2): 0 pages. ACPI: RSDP (v000 ACPIAM ) @ 0x000f8d00 ACPI: RSDT (v001 A M I OEMRSDT 0x09000917 MSFT 0x00000097) @ 0x3f7c0000 ACPI: FADT (v002 A M I OEMFACP 0x09000917 MSFT 0x00000097) @ 0x3f7c0200 ACPI: MADT (v001 A M I OEMAPIC 0x09000917 MSFT 0x00000097) @ 0x3f7c0390 ACPI: MCFG (v001 A M I OEMMCFG 0x09000917 MSFT 0x00000097) @ 0x3f7c03f0 ACPI: OEMB (v001 A M I AMI_OEM 0x09000917 MSFT 0x00000097) @ 0x3f7ce040 ACPI: DSDT (v001 92A2V 92A2V140 0x00000140 INTL 0x20051117) @ 0x00000000 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) Processor #0 Pentium(tm) Pro APIC version 20 ACPI: LAPIC (acpi_id[0x02] lapic_id[0x81] disabled) Processor #129 invalid (max 16) Using ACPI for processor (LAPIC) configuration information Intel MultiProcessor Specification v1.4 Virtual Wire compatibility mode. OEM ID: Intel Product ID: Calistoga APIC at: 0xFEE00000 I/O APIC #1 Version 32 at 0xFEC00000. Enabling APIC mode: Flat. Using 1 I/O APICs Processors: 1 Kernel command line: auto BOOT_IMAGE=RDS-32-GE ro root=306 ramdisk=150000 BOOT_FILE=/boot/bzImage console=tty0 console=ttyS0,19200 Initializing CPU#0 Detected 1866.717 MHz processor. Console: colour VGA+ 80x25 Calibrating delay loop... 3722.44 BogoMIPS Memory: 904600k/917504k available (1462k kernel code, 12512k reserved, 581k data, 116k init, 0k highmem) Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes) Inode cache hash table entries: 65536 (order: 7, 524288 bytes) Mount cache hash table entries: 512 (order: 0, 4096 bytes) Buffer cache hash table entries: 65536 (order: 6, 262144 bytes) Page-cache hash table entries: 262144 (order: 8, 1048576 bytes) CPU: L1 I cache: 32K, L1 D cache: 32K Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Checking 'hlt' instruction... OK. POSIX conformance testing by UNIFIX CPU: L1 I cache: 32K, L1 D cache: 32K Intel machine check reporting enabled on CPU#0. CPU0: Intel(R) Celeron(R) M CPU 440 @ 1.86GHz stepping 0c per-CPU timeslice cutoff: 182.83 usecs. enabled ExtINT on CPU#0 ESR value before enabling vector: 00000000 ESR value after enabling vector: 00000000 Error: only one processor found. ENABLING IO-APIC IRQs Setting 1 in the phys_id_present_map ...changing IO-APIC physical APIC ID to 1 ... ok. ..TIMER: vector=0x31 pin1=2 pin2=0 testing the IO APIC....................... .................................... done. Using local APIC timer interrupts. calibrating APIC timer ... ..... CPU clock speed is 1866.8592 MHz. ..... host bus clock speed is 133.3470 MHz. cpu: 0, clocks: 1333470, slice: 666735 CPU0<T0:1333456,T1:666720,D:1,S:666735,C:1333470> Waiting on wait_init_idle (map = 0x0) All processors have done init_idle PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=5 PCI: Using configuration type 1 PCI: Probing PCI hardware PCI: Probing PCI hardware (bus 00) PCI: Ignoring BAR0-3 of IDE controller 00:1f.1 Transparent bridge - Intel Corp. 82801BAM/CAM PCI Bridge PCI: Discovered primary peer bus 0b [IRQ] PCI: Using IRQ router default [8086/27bd] at 00:1f.0 PCI->APIC IRQ transform: (B0,I2,P0) -> 16 PCI->APIC IRQ transform: (B0,I28,P0) -> 16 PCI->APIC IRQ transform: (B0,I28,P0) -> 16 PCI->APIC IRQ transform: (B0,I28,P1) -> 17 PCI->APIC IRQ transform: (B0,I29,P0) -> 23 PCI->APIC IRQ transform: (B0,I29,P1) -> 19 PCI->APIC IRQ transform: (B0,I29,P0) -> 23 PCI->APIC IRQ transform: (B0,I31,P0) -> 18 PCI->APIC IRQ transform: (B0,I31,P1) -> 19 PCI->APIC IRQ transform: (B1,I0,P0) -> 16 PCI->APIC IRQ transform: (B2,I0,P0) -> 16 PCI->APIC IRQ transform: (B3,I0,P0) -> 16 PCI->APIC IRQ transform: (B4,I0,P0) -> 17 PCI->APIC IRQ transform: (B5,I8,P0) -> 20 isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 Initializing RT netlink socket Starting kswapd Detected PS/2 Mouse Port. pty: 256 Unix98 ptys configured keyboard: Timeout - AT keyboard not present?(ed) keyboard: Timeout - AT keyboard not present?(f4) Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI ISAPNP enabled ttyS00 at 0x03f8 (irq = 4) is a 16550A floppy0: no floppy controllers found RAMDISK driver initialized: 16 RAM disks of 150000K size 1024 blocksize loop: loaded (max 8 devices) Intel(R) PRO/1000 Network Driver - version 5.7.6-k1-NAPI Copyright (c) 1999-2004 Intel Corporation. Linux agpgart interface v0.99 (c) Jeff Hartmann agpgart: Maximum main memory to use for agp memory: 816M [drm] Initialized tdfx 1.0.0 20010216 on minor 0 [drm] Initialized radeon 1.7.0 20020828 on minor 1 [drm:drm_init] *ERROR* Cannot initialize the agpgart module. Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx hda: SQF-P10S2-2G, ATA DISK drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 hda: attached ide-disk driver. hda: 3940272 sectors (2017 MB) w/1KiB Cache, CHS=977/64/63 hda: task_no_data_intr: status=0x51 { DriveReady SeekComplete Error } hda: task_no_data_intr: error=0x04 { DriveStatusError } Partition check: hda: hda1 hda2 < hda5 hda6 > Linux Kernel Card Services 3.1.22 options: [pci] [cardbus] [pm] NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP, IGMP IP: routing cache hash table of 8192 buckets, 64Kbytes TCP: Hash tables configured (established 262144 bind 65536) IPv4 over IPv4 tunneling driver GRE over IPv4 tunneling driver ip_conntrack version 2.1 (7168 buckets, 57344 max) - 288 bytes per conntrack ip_tables: (C) 2000-2002 Netfilter core team NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. ds: no socket drivers loaded! VFS: Mounted root (ext2 filesystem) readonly. Freeing unused kernel memory: 116k freed INIT: version 2.78 booting Services..... Mounting proc filesystem: [ OK ] Configuring RDS kernel parameters: [ OK ] Setting clock (localtime): Wed Aug 13 16:41:17 IDT 2014 [ OK ] Activating swap partitions: [ OK ] Setting hostname RDSHost: [ OK ] Checking RDS root filesystem e2fsck 1.19, 13-Jul-2000 for EXT2 FS 0.5b, 95/08/09 Using EXT2FS Library version 1.19, 13-Jul-2000 [ OK ] Remounting root filesystem in read-write mode: [ OK ] Finding module dependencies: [ OK ] Loading eth module [ OK ] Checking filesystems e2fsck 1.19, 13-Jul-2000 for EXT2 FS 0.5b, 95/08/09 Using EXT2FS Library version 1.19, 13-Jul-2000 [ OK ] Mounting local filesystems: [ OK ] Turning on user and group quotas for local filesystems: [ OK ] touch: creating `/var/log/wtmp': No such file or directory chgrp: getting attributes of `/var/log/wtmp': No such file or directory chmod: getting attributes of `/var/log/wtmp': No such file or directory Enabling swap space: [ OK ] mke2fs 1.19, 13-Jul-2000 for EXT2 FS 0.5b, 95/08/09 INIT: Entering runlevel: 3 Entering non-interactive startup Updating /etc/fstab [ OK ] Checking for new hardware Hardware Discovery Utility 0.98.10(C) 2001 Red Hat, Inc. %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% Welcome to Kudzu %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% % Welcome to Kudzu, the Red Hat Linux hardware detection % % and configuration tool. % % % % On the following screens you will be able to configure % % any new or removed hardware for your computer. % % % % Press any key to continue. % % % % Normal bootup will continue in 2 seconds. % % % %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% <Tab>/<Alt-Tab> between elements | <Space> selects | <F12> next screen � | % Timeout exceeded. % On the following screens you will be able to configure % any new or removed hardware for your computer. % Press any key to continue. Normal bootup will continue in 1 seconds.� [FAILED] Hardware configuration timed out. Run '/usr/sbin/kudzu' from the command line to re-detect.Setting network parameters: [ OK ] Bringing up interface lo: [ OK ] Starting system logger: [ OK ] Starting kernel logger: [ OK ] Starting portmapper: [ OK ] Starting NFS file locking services: Starting NFS statd: [ OK ] Starting keytable: [ OK ] Initializing random number generator: [ OK ] Starting atd: [ OK ] Starting snmpd: [ OK ] Starting sshd: [ OK ] Starting xinetd: [ OK ] Starting console mouse services: [ OK ] keyboard: Timeout - AT keyboard not present?(f4) Starting httpd: [ OK ] Starting crond: [ OK ] /usr/src/linux-2.4.32/drivers/net/e1000e/e1000e.o: init_module: No such device Hint: insmod errors can be caused by incorrect module parameters, including invalid IO or IRQ parameters Starting RDS... RDS.................... Stopping httpd: [ OK ] Starting httpd: [ OK ] iptables: Bad rule (does a matching rule exist in that chain?) iptables: Bad rule (does a matching rule exist in that chain?) Configure Ethernet ethtool -s eth0 speed 100 duplex full autoneg on Nothing to flush. Stopping httpd: [ OK ] Starting httpd: Welcome to RDS System RDSHost login: [ OK ] iptables: Bad rule (does a matching rule exist in that chain?) iptables: Bad rule (does a matching rule exist in that chain?) SIOCADDRT: File exists iptables: Bad rule (does a matching rule exist in that chain?) iptables: Bad rule (does a matching rule exist in that chain?) Stopping httpd: /etc/init.d/httpd: kill: (912) - No such pid /etc/init.d/httpd: kill: (911) - No such pid /etc/init.d/httpd: kill: (876) - No such pid /etc/init.d/httpd: kill: (875) - No such pid /etc/init.d/httpd: kill: (874) - No such pid /etc/init.d/httpd: kill: (866) - No such pid /etc/init.d/httpd: kill: (859) - No such pid /etc/init.d/httpd: kill: (858) - No such pid /etc/init.d/httpd: kill: (845) - No such pid /etc/init.d/httpd: kill: (844) - No such pid /etc/init.d/httpd: kill: (837) - No such pid /etc/init.d/httpd: kill: (831) - No such pid /etc/init.d/httpd: kill: (830) - No such pid /etc/init.d/httpd: kill: (829) - No such pid /etc/init.d/httpd: kill: (828) - No such pid /etc/init.d/httpd: kill: (827) - No such pid /etc/init.d/httpd: kill: (825) - No such pid /etc/init.d/httpd: kill: (824) - No such pid /etc/init.d/httpd: kill: (822) - No such pid /etc/init.d/httpd: kill: (813) - No such pid /etc/init.d/httpd: kill: (812) - No such pid /etc/init.d/httpd: kill: (811) - No such pid /etc/init.d/httpd: kill: (810) - No such pid /etc/init.d/httpd: kill: (809) - No such pid /etc/init.d/httpd: kill: (808) - No such pid /etc/init.d/httpd: kill: (807) - No such pid /etc/init.d/httpd: kill: (806) - No such pid /etc/init.d/httpd: kill: (805) - No such pid /etc/init.d/httpd: kill: (804) - No such pid /etc/init.d/httpd: kill: (803) - No such pid [ OK ] Starting httpd: [ OK ] Shutting down kernel logger: [ OK ] Shutting down system logger: [ OK ] Starting system logger: [ OK ] Starting kernel logger: [ OK ] Stopping httpd: [ OK ] Starting httpd: [ OK ] iptables: Bad rule (does a matching rule exist in that chain?) iptables: Bad rule (does a matching rule exist in that chain?) Shutting down kernel logger: [ OK ] Shutting down system logger: [ OK ] Starting system logger: [ OK ] Starting kernel logger: [ OK ] Shutting down kernel logger: [ OK ] Shutting down system logger: [ OK ] Starting system logger: [ OK ] Starting kernel logger: [ OK ] iptables: Bad rule (does a matching rule exist in that chain?) iptables: Bad rule (does a matching rule exist in that chain?) Stopping snmpd: ucd-snmp[444]: Received TERM or STOP signal... shutting down... [ OK ] Starting snmpd: [ OK ] Stopping snmpd: [ OK ] Starting snmpd: [ OK ] Stopping snmpd: [ OK ] Starting snmpd: [ OK ]
INIT: Switching to runlevel: 0 INIT: Stopping keytable: [ OK ] Shutting down console mouse services: [ OK ] Stopping httpd: [ OK ] Stopping sshd:[ OK ] Stopping snmpd: [ OK ] Stopping xinetd: [ OK ] Stopping atd: [ OK ] Stopping crond: [ OK ] Saving random seed: [ OK ] Shutting down NFS file locking services: Shutting down NFS statd: [ OK ] Stopping portmapper: [ OK ] Shutting down kernel logger: [ OK ] Shutting down system logger: [ OK ] Starting killall: [ OK ] Sending all processes the TERM signal... 2014/08/13 16:46:58 RDS: RDS Terminating on signal Sending all processes the KILL signal... Syncing hardware clock to system time Turning off swap: Turning off accounting: accton: Function not implemented Turning off quotas: Unmounting file systems: Unmounting proc file system: Halting system... flushing ide devices: hda e1000: eth0: e1000_suspend: Error enabling D3 cold wake e1000: eth1: e1000_suspend: Error enabling D3 cold wake Power down.
In order to connect through ssh, a computer with direct connectivity is needed. After having that this is the command which will provide the access:
Host$ssh te@192.168.11.4 Password:*****
In the following table there are all the possible username and passwords:
Username | Password | Authority |
---|---|---|
ggcon|Full-access read/write | ||
sg1|Read/write to second level | ||
popgate|Read-only to first level with user drop capability | ||
popgate|First-level show capabilities |
Return to Phase 1 page.