Evaluation and Improvement of technologies for CCTV
Wiki for ITS | ||||||
---|---|---|---|---|---|---|
|
Evaluation and Improvement of Security in Embedded Sensor Systems
by | N.n. |
---|---|
Supervisor(s) | Knut Øvsthus |
Due date | 2015/05/02 |
Status | Planned |
Problem description: | Many industrial sensor networks use real-time data transmission over public networks (GPRS, the Internet, satellites) or private radio links or cables. These links are in principle possible to listen in to or monitor. With increasing awareness of security risks for information theft or distortion in sensor systems it is suspected that customers buying sensor network services will in the near future demand security as well as reliability.
Embedded systems often have limitations regarding data processing and internal memory. In addition there are typically limitations in data rates of the transmission medium. The thesis will investigate what demands to security exists (if any) from governmental organs (Norwegian, European, globally) and what typical demands central actors in Norwegian industries demand. Coming trends for the future will also be evaluated. In addition the thesis will evaluate different possibilities for implementing security on already existing embedded sensor systems. This thesis will in the end be able to answer what might be necessary functionality to secure data information for data loggers that deliver sensor data to customers using open communication channels. |
Methods and Tools: | The tools and methods in this thesis are based on
|
Time schedule | The envisaged time schedule (for a long thesis/60 ECTS) is:
|
Pre-Knowledge | This thesis includes a reasonable amount of programming. The envisaged thesis is based on security and radio communications, thus expects the user to have followed at least two radio-or security-related courses |
Approved | Pending by |
Keywords | Embedded systems, Security |
Depiction |
this page was created by Special:FormEdit/Thesis, and can be edited by Special:FormEdit/Thesis/Evaluation and Improvement of technologies for CCTV
Metodar tenkt å brukast i oppgåva:
- ROS-analyse: Evaluera kva grad av sikkerheit som må implementerast for ulike scenario basert på
- Informasjonsverdi
- Risiko for tap/endring av informasjon
- Forventa krav frå omverd
- Kva er hensiktsmessig/ønskeleg for eit (eller fleire) gitt system
- Bestemme seg for ei løysing
- Teste denne
This page provides hints on what to include in your master thesis.
TOC
Title page, abstract, ...
- 1. Introduction, containing: short intro into the area, what is happening
- 1.1 Motivation, containing: what triggered me to write about what I'm writing about
- 1.2 Methods, containing: which methods are you using, how do you apply them
- 2. Scenario, optional chapter for explaining some use cases
- 2.1 user scenario, (bad name, needs something bedre)
- 2.2 Requirements/Technological challenges
- 3. State-of-the art/Analysis of technology, structure your content after hardware/SW (or other domains). Describe which technologies might be used to answer the challenges, and how they can answer the challenges
- 3.1 technology A
- 3.2 technology B
- 4. Implementation
- 4.1 Architecture, functionality
- 4.2
- 5. Evaluation
- 6. Conclusions
- References
Comments
Red line
Your thesis should have a "red line", which is visible throughout the whole thesis. This means you should mention in the beginning of each chapter how the chapter contributes to the "goals of the thesis".
Use of scientific methods
A thesis follows a standard method:
- describe the problem (problemstilling)
- extract the challenges. These challenges should be measurable, e.g. method is too slow to be useful to voice handover.
- Analyse technology with respect to challenges. Don't write & repeat "everything" from a certain technology, concentrate on those parts (e.g. protocols) which are of importance for your problem
References
- Wikipedia is good to use to get an overview on what is happening. But there is not scientific verification of Wikipedia, thus you should use wikipedia only in the introduction of a chapter (if you use text from wikipedia). Use scientific literature for your thesis.
- Scientific library is "at your hand", you can get there directly from UiO: [[How to get access to IEEE, Springer and other scientific literature -> Unik/UiOLibrary]]
- I suggest that references to web pages, e.g. OASIS, W3C standards, are given in a footnote. Only if you find white papers or other .pdf documents on a web page then you refer to them in the reference section.
Evaluation of own work
Perform an evaluation of your own work. Revisit the challenges and discuss in how you fulfilled them. Provide alternative solution and discuss what should be done (or what could have been done).