Difference between revisions of "DigI:Establish InfoSpot"

From its-wiki.no

Jump to: navigation, search
m (2. Put your phone in 3G (4G) modus)
m (4. create a map with buildings and distances)
Line 66: Line 66:
 
==4. create a map with buildings and distances ==
 
==4. create a map with buildings and distances ==
 
Before you go to the field, please identify already where the buildings are  
 
Before you go to the field, please identify already where the buildings are  
* In a browser, open http://plus.codes/map
+
* In a browser, open http://plus.codes/map and click on the 3 horizontal bars to select the satellite view
 
[[File:PlusCodes_Map.png|530px|thumb|center|''Figure 6: PlusCodes Map, select 3 bars and satellite view'']]
 
[[File:PlusCodes_Map.png|530px|thumb|center|''Figure 6: PlusCodes Map, select 3 bars and satellite view'']]
* identify the houses to be connected
+
* identify the houses to be connected, and write down the "Plus Code address". Alternatively, make a screenshot
 
[[File:PlusCodes_Building.png|530px|thumb|center|''Figure 7: In the satellite view, identify the houses to be used for the InformationSpot'']]
 
[[File:PlusCodes_Building.png|530px|thumb|center|''Figure 7: In the satellite view, identify the houses to be used for the InformationSpot'']]
 
  
 
==5. purchase and configure the infrastructure ==
 
==5. purchase and configure the infrastructure ==

Revision as of 15:02, 22 May 2019

Establish an Internet Lite Information Spot

Steps:

  1. measure the available networks from the operators
  2. identify the direction of closest tower
  3. measure field strength and technology
  4. create a map with buildings and distances
  5. purchase and configure the infrastructure
  6. installation on the site

Before you go out into the field, install a network analyser, e.g. Network Cell Info Lite (download from Google Play)

Note: this guide is made for Android 8.0. Functionality might look different

1. Measure the available networks from the operators

Figure 1: Results of Network Search, showing both the operators and the networks they provide

Open your Android phone

Figure 2: List of Network operators in Tanzania
  • Goto Settings
  • Select Network & Internet
  • Select Mobile Network
  • Select Network Operators
  • Search Networks. It will take some minutes to show all networks.


Figure 1 shows the result of the Network Search, showing a total of 6 operators, the top 4 offering a 2G network are Tigo, 64009 (which is Halotel), Vodacom and Airtel. In addition, Vodacom and 64009 (Halotel) offer a 3G network. The normal ranking is after the strength of the mobile network, pointing out that the 3G networks are weaker than the 2G networks.

Please make a screenshot of the results of the network search.

Note: The operator code is put together from the mobile country code (MCC, here: 640 for Tanzania) and the mobile network operators (MNC, here 02 Tigo - 09 Hits=Halotel).


Please create a Screenshot similar to Figure 1.

2. Put your phone in 3G (4G) modus

Figure 3: Select 3G (4G) as connection modus on your phone

Note: your phone jumps to the best network. Thus, if you have a good 2G (GSM) network and a week 3G (UMTS) network, your phone will report from the 2G network. Thus, you need to fix your phone to the 3G (or 4G) network.

Open your Android phone

  • Goto Settings
  • Select Network & Internet
  • Select Mobile Network
  • Select Preferred network type
  • Select 3G only (or 4G only). Now your phone is set to use 3G only, providing us with stable 3G measurements.

3. Measure field strength

  • Open Network Cell Info Lite (or a similar app) on your Android phone. You'll see the following screens
  • Gauge: gives you the current field strength, here: -91 dBm from VodaCom using the UMTS (3G) network
  • Raw: provides more info (see Figure 1), needed to analyse the mobile networks with neighbouring antennas. Here you see that we have the Network in Tanzania (MCC=640), operator (MCU=4) and some more technical details
  • Plot: used to see the variation of the field strength. Through PLOT we can measure the direction to the tower:. Hold the phone in front of your breast (ca 20-30 cm distance), and slowly turn around 360 deg. In the diagram you'll see that we reached twice the peak of -99 dBm, and in the opposite direction the field strength went down to -109 dBm.

Figure 3: Field strength measured through Network Cell Info Figure 4: Detailed information about the field strength Figure 5: Turn 360 deg to identify the direction of the tower

Please make a screenshot of all these screens (Fig. 3 - 5), and indicate in which direction your mobile tower stands.

In our example from Izazi, where all the measurements were done, we see that we have an "orange" signal, and in certain directions a read signal. These measures were performed while standing on a roof of a car, and demonstrate that a person on the ground will not be able to connect to a 3G network, because the field strength is too low. But, using a) a pole and b) a directive antenna helps us to get sufficient signal to reach the Internet.

4. create a map with buildings and distances

Before you go to the field, please identify already where the buildings are

  • In a browser, open http://plus.codes/map and click on the 3 horizontal bars to select the satellite view
Figure 6: PlusCodes Map, select 3 bars and satellite view
  • identify the houses to be connected, and write down the "Plus Code address". Alternatively, make a screenshot
Figure 7: In the satellite view, identify the houses to be used for the InformationSpot

5. purchase and configure the infrastructure

Examples on how we set up the Information Spots are described in Solutions.

Get in Contact with the BasicInternet Foundation for a recommendation of the equipment need https://www.basicinternet.info/contact

6. Installation on the site

We will then configure the equipment, ship it to you, such that you can install it. See our example from Izazi, where it took us 90 min to:

  • connect the antenna to an iron pole of 6 m,
  • raise the pole
  • connect the Wifi-spot (the local network control centre LNCC)
  • connect the Village server