Difference between revisions of "DigI:RB921 config"
From its-wiki.no
Josef.Noll (Talk | contribs) (Created page with "= Configuration of Sector Antenna RB921= based on the BasicInternet:Solutions Configuration through WinBox4MAC/CrossOver (MAC) or Winbox.exe (Windows) *Connect the devic...") |
Josef.Noll (Talk | contribs) (→7. Go to New Terminal) |
||
Line 38: | Line 38: | ||
*Take the file to the window File list and there will appear with the other two folders flash & flash/skins | *Take the file to the window File list and there will appear with the other two folders flash & flash/skins | ||
*Take the file another time and this time put it within the flesh/skin folder to be imported in it also | *Take the file another time and this time put it within the flesh/skin folder to be imported in it also | ||
− | == 7. Go to New Terminal == | + | == 7. Go to New Terminal in Winbox== |
*On the end of the page write the command (import the file you import name) | *On the end of the page write the command (import the file you import name) | ||
*Press enter and wait for a few seconds | *Press enter and wait for a few seconds | ||
* It should give you a message that the file is loaded and exceustd successfully | * It should give you a message that the file is loaded and exceustd successfully |
Revision as of 21:50, 1 March 2021
Digital Inclusion (DigI) | |||||||
---|---|---|---|---|---|---|---|
|
Contents
Configuration of Sector Antenna RB921
based on the BasicInternet:Solutions
Configuration through WinBox4MAC/CrossOver (MAC) or Winbox.exe (Windows)
- Connect the device direct to your laptop and then use the WinBox or the used configuring program, make sure to add the power over Ethernet (PoE).
- If the device doesn't connect or appear within the configuration window then refresh, or add the E01 mac address.
- Share Wifi IP configuration from MAC
- If initial "find" from wAP fails, then disconnect Wifi, only connect USB to wAP, and "find"
- If the available network doesn't permit net/wifi sharing then connect the Mikrotikk device direct to a wifi router such RB960PGS
- Reason: for updating the packages, the wAP needs to be connected (through the MAC) with Internet
Steps
1. Connect the wAP
- Connect the Sector Antenna to a Mikrtikk 960
- Connect the Mac to the Mikrotik wifi network that will appear on your network list looks like MikroTik-28FBFB
2. Open Winbox4Mac
- Go to neighbours connect to the device appears
- If no one appears click refresh then it will come up
- Then there is an automatic message will come up choose (Remove configuration)
- Go to System=> reset-configuration no-default=>yes
- Automatically, you will be logged out
3. Connect the Sector Antenna to the Mac
- Go to neighbours connect to the device appears
- If no one appears click refresh then it will come up
- If it doesn't work unconnected the Sector Antenna
- Usually, it won't connect if you use a limited and strict network that you should change to another network to give you the ability to share the network with the Mikrotik device
- go to network preferences and choose USB10/...00LAN
- Go to the sharing folder in the setting and open sharing
4. Open Winbox4Mac
- After connecting go to IP => DHCP client => click on (+) on the top to the left
- Go to interface and select (ether 1) => apply => OK
- A table will appear and show Interface (ether1), Use P... (Yes), Add D... (Yes), IP Address (....numbers...), Expire After (...time...), & Status (bound)
5. Go to system
- Choose packages => check for updates => Download&Install
- Down the box you will get the message Download and rebooting
6. Go to files
- Go to file list and import the suitable configuration file (RB921) from OwnCloud => BasicInternet => Technology => Mikrotik => Tanzania_backups => the file ....
- Take the file to the window File list and there will appear with the other two folders flash & flash/skins
- Take the file another time and this time put it within the flesh/skin folder to be imported in it also
7. Go to New Terminal in Winbox
- On the end of the page write the command (import the file you import name)
- Press enter and wait for a few seconds
- It should give you a message that the file is loaded and exceustd successfully